Brutkey

wedge
@wedge@woodworking.group

I have a few minutes and don’t have an actual split-nut driver for the Disston-looking saw, so switching focus to the old rusty boy.

First a little backstory that some may remember from a few years ago…

At that time I had bought a nest of saws from a particular seller online, dirt cheap; seven for 10€, or something. Two of them caught my eye, and that was the gamble. They looked like good saws but where covered in something black. I had to buy them to know.

#woodworking

Cont.

wedge
@wedge@woodworking.group

They all came off. Not easy, but no stripping, and no clamping needed.

The screws have holes in the center base of the driver slots. I’m guessing that really helped get lube into the threads.

Maybe I can save this tote after all.

But, do check out Bob’s video on stubborn bolts.

/Fin

WoodWonk
@woodwonk@mindly.social

@wedge@woodworking.group

Do you have any experience with the citric acid bath's effect on saw plate etchings? The logo etching on one of my Disstons is still pretty visible. While I plan to clean it up to use, it would be cool if I could do so without damaging the etching. Any words of wisdom?

wedge
@wedge@woodworking.group

@woodwonk@mindly.social

If nothing else, leave the word ‘Disston’ visible and dirty and clean up the rest. :)

WoodWonk
@woodwonk@mindly.social

@wedge@woodworking.group

Thanks for the info. The saw with the etching only has a few spots of rust, so I think I'll just scrape and paint the rust remover on the spots and leave the rest alone.

If the "Disstonian Institute" web site is to be believed, the medallion on this saw identifies it as from the last line from the Disston family business, made in 1953 - 1955 before being sold to HK Porter.

A closeup of a metal medallion on the handle of an old handsaw. The medallion is a round and gold or brass toned. There is a thin raised rim. The words "DISSTON" and "U.S.A." are embossed on the surface inside the rim. There is symbol in the center consisting of a keystone with a pan balance scale inside. The keystone is surrounded by a circle of tiny solid raised dots. The saw handle is wood, medium brown in color, with some "wheat" chip carving visible. The metal plate of the saw has a brushed steel or satin appearance with a few dark spots. Manufacturer's logo etched on the metal plate of an old handsaw. The etching is darker gray against the silver gray unetched plate. The plate has a brushed steel or satin texture. There are some darker spots on the metal. The logo is a keystone with a 2 pan balance scale in the middle. Text in the top part of the keystone reads "ESTABLISHED 1840". Below that is the company name "HENRY DISSTON & SONS" Between the pans of the balance scale is the saw model number: "D-23". At the bottom of the keystone is "PHILADELPHIA U S A".