Brutkey

Martin Aspeli
@optilude@techhub.social

@ikkeT@mementomori.social

Testing tips:

- Put a multimeter on the output jack (black to ground, red to hot - or plug a short cable in and clip the meter to the sleeve and tip of the other end) and measure resistance. Turn the volume and tone all the way up (!) and measure resistance as you move the switch. That tells you what the amp “sees”.

- Connect the guitar to an amp and tap the pole pieces of each pickup with a screwdriver. You’ll hear which pickup is active as you move the switch. Even better, use an old fashioned metal tuning fork and hold it over the pickup. This way you can check what pickup is doing what without having to put the strings on. You can also test the tone and volume knobs this way.