Radio Azureus@RadioAzureus@mastodon.social
There are hundreds of ways of connecting an effect to your mixing console. There is one way to connect an effect to my sub mixer
When you use the Auxiliary busses you have to send the signal through a tip/sleeve cable to the effect, then return the signal to the console Aux return Channel. For a stereo effect you need to use two Aux busses.
Your console has send Pot. meters and return Pot. meters for every bus.
/7
#Music #Audio #Bass #Guitar #SoundEngineering #Joyo #Pedal #Console
Radio Azureus@RadioAzureus@mastodon.social
Just like with built in effects your Send is decided by Aux Send your Return is decided by Aux Return which gives The amount of decibels dB of the effect in the mix
If your console only has two Aux busses you can either use both for the stereo effect, or use one for two discrete effects if you do not wish to daisy chain them. You will then have two parallel effects which can be used layered on your whole mix.
/8
#Music #Audio #Bass #Guitar #SoundEngineering #Joyo #Pedal #Console