A little more progress with marking out joinery and starting to cut dovetails. I decided on tails facing up and corners mitered.
But it’s single digits in Chicago today so everything is stinking cold. I only managed to cut one set of tails before I retreated to a warmer upstairs.
#woodworking
I had to put this project on pause to refinish a chair over the last few weekends but I'm back chipping away at it.
Something that's been worrying me since drawing out the plans was how I was going to transfer the tails to the pin board because the case pieces are so big.
It took a little ingenuity but problem solved. This workbench is the gift that keeps on giving.
#woodworking
That’s a wrap for this week. Work is starting back up tomorrow so things will be much slower now.
My goal was to get the case sections ready for joinery. I’m close. I have one more panel that needs final flattening otherwise I’m calling the week a #woodworking success (not without a lot of aches and pains along the way though 🤪
).
A little more progress with marking out joinery and starting to cut dovetails. I decided on tails facing up and corners mitered.
But it’s single digits in Chicago today so everything is stinking cold. I only managed to cut one set of tails before I retreated to a warmer upstairs.
#woodworking
Hopefully this will be the last photo of “stacked wood” but the significance of this one is that I finally finished dimensioning and jointing all the case boards. 🎉
I’ve logged about 25 hours this week so that’s about 1.5 hrs per board. These fuckers are straight and true though.
Aiming for a glue-up this weekend.
#woodworking
That’s a wrap for this week. Work is starting back up tomorrow so things will be much slower now.
My goal was to get the case sections ready for joinery. I’m close. I have one more panel that needs final flattening otherwise I’m calling the week a #woodworking success (not without a lot of aches and pains along the way though 🤪).
Y’all why do I fall in love with the most expensive gear!?
This is a Stabilo 8052 white pencil and it’s by far the best marking pencil for dark wood I’ve ever used. It’s clear, smooth, and erases easily.
I need another marking pencil (mine is nearly a nub) but these are $6+ EACH. 😭
Anyone have any other white #woodworking marking pencils they can recommend?
Goodbye loud machines and hello to the zen state of hand plans.
It’s edge jointing day! Probably the first of many. I haven’t jointed by hand in over a year so kind of proud to see I still got it.
I was going to joint and glue-up each panel section one-by-one but I think I might do all the boards first and then have one big glue-up. Maybe that will cut down on warping if panels are sitting around for a long time?
Either way, I’m very slow. It’ll be a miracle if I finish this in 2026.
Pictured is the bottom panel of the carcas which is all I was able to get done today.
#woodworking
Hopefully this will be the last photo of “stacked wood” but the significance of this one is that I finally finished dimensioning and jointing all the case boards. 🎉
I’ve logged about 25 hours this week so that’s about 1.5 hrs per board. These fuckers are straight and true though.
Aiming for a glue-up this weekend.
#woodworking
And my little helper today. Lucy has a keen eye for matching boards to panel sections.
#woodworking #dogsofmastodon
Goodbye loud machines and hello to the zen state of hand plans.
It’s edge jointing day! Probably the first of many. I haven’t jointed by hand in over a year so kind of proud to see I still got it.
I was going to joint and glue-up each panel section one-by-one but I think I might do all the boards first and then have one big glue-up. Maybe that will cut down on warping if panels are sitting around for a long time?
Either way, I’m very slow. It’ll be a miracle if I finish this in 2026.
Pictured is the bottom panel of the carcas which is all I was able to get done today.
#woodworking
The temps went from 50 F yesterday down to the teens today so it was chilly running the thickness planer in the garage. 🥶
But since I already had the face side work done, it didn’t take nearly as long as yesterday.
Except for a few bandsaw rips, this will be the last of the power tools for the build.
Tomorrow is edge jointing and hopefully I can get started on gluing up the panels! Exciting!
#woodworking
And my little helper today. Lucy has a keen eye for matching boards to panel sections.
#woodworking #dogsofmastodon
I leaned pretty heavily on a planer sled to establish a face side for all of them this time. I had two boards flat enough to run straight through the planer but all the others all needed shimming of some kind.
This was the worst of them (it’s a really pretty board though!)
16 boards took me most of the day using this method. Maybe I should have just done it with hand tools like I used to. 😂
#woodworking
The temps went from 50 F yesterday down to the teens today so it was chilly running the thickness planer in the garage. 🥶
But since I already had the face side work done, it didn’t take nearly as long as yesterday.
Except for a few bandsaw rips, this will be the last of the power tools for the build.
Tomorrow is edge jointing and hopefully I can get started on gluing up the panels! Exciting!
#woodworking
I’ve been accumulating walnut boards all year and I have just enough to get started on the case.
I will still need to buy enough for the cabinet doors, drawer, and back. This thing is going to be really big and heavy. 😮💨
#woodworking
I leaned pretty heavily on a planer sled to establish a face side for all of them this time. I had two boards flat enough to run straight through the planer but all the others all needed shimming of some kind.
This was the worst of them (it’s a really pretty board though!)
16 boards took me most of the day using this method. Maybe I should have just done it with hand tools like I used to. 😂
#woodworking
Hello #woodworking friends! 👋
I’m starting a new project this week. It’s a year behind schedule but oh well!
One year ago I made a half size cabinet as practice for a full size version: https://hachyderm.io/@jamigibbs/113755160063860236
With the next week off of work, I thought it would be a good time to get the full size started. This one will definitely take a while though.
I’ve been accumulating walnut boards all year and I have just enough to get started on the case.
I will still need to buy enough for the cabinet doors, drawer, and back. This thing is going to be really big and heavy. 😮💨
#woodworking
Jami :heart_cyber: